Pyrite Crystal Cube on matrix # 48
Mineral Type: Pyrite Crystal Cube on matrix # 48
Location: Logrono, Spain
Size: 1/2″ wide ( cube itself )
Cost: $ 9
Note: This specimen has been formed naturally but the cube has been re-mounted on the rock..
The mineral pyrite, or iron pyrite, also known as fool’s gold, is an iron sulfide with the formula FeS2. This mineral’s metallic luster and pale brass-yellow hue give it a superficial resemblance to gold, hence the well-known nickname of fool’s gold. The color has also led to the nicknames brass, brazzle, and Brazil, primarily used to refer to pyrite found in coal
Pyrite is the most common of the sulfide minerals. The name pyrite is derived from the Greek πυρίτης (puritēs), “of fire” or “in fire”, in turn from πύρ (pur), “fire”. In ancient Roman times, this name was applied to several types of stone that would create sparks when struck against steel; Pliny the Elder described one of them as being brassy, almost certainly a reference to what we now call pyrite. By Georgius Agricola‘s time, the term had become a generic term for all of the sulfide minerals.
Pyrite is usually found associated with other sulfides or oxides in quartz veins, sedimentary rock, and metamorphic rock, as well as in coal beds and as a replacement mineral in fossils. Despite being nicknamed fool’s gold, pyrite is sometimes found in association with small quantities of gold. Gold and arsenic occur as a coupled substitution in the pyrite structure. In theCarlin–type gold deposits, arsenian pyrite contains up to 0.37 wt% gold.
Pyrite enjoyed brief popularity in the 16th and 17th centuries as a source of ignition in early firearms, most notably the wheellock, where the cock held a lump of pyrite against a circular file to strike the sparks needed to fire the gun.
Pyrite has been used since classical times to manufacture copperas, that is, iron(II) sulfate. Iron pyrite was heaped up and allowed to weather.(an example of an early form of heap leaching). The acidic runoff from the heap was then boiled with iron to produce iron sulfate. In the 15th century, such leaching began to replace the burning of sulfur as a source of sulfuric acid. By the 19th century, it had become the dominant method.
Pyrite remains in commercial use for the production of sulfur dioxide, for use in such applications as the paper industry, and in the manufacture of sulfuric acid. Thermal decomposition of pyrite into FeS (iron(II) sulfide) and elemental sulfur starts at 550 °C; at around 700 °C pS2 is about1 atm.
During the early years of the 20th century, pyrite was used as a mineral detector in radio receivers, and is still used by ‘crystal radio‘ hobbyists. Until the vacuum tube matured, the crystal detector was the most sensitive and dependable detector available- with considerable variation between mineral types and even individual samples within a particular type of mineral. Pyrite detectors occupied a midway point betweengalena detectors and the more mechanically complicated perikon mineral pairs. Pyrite detectors can be as sensitive as a modern 1N34A diodedetector.
Pyrite has been proposed as an abundant, inexpensive material in low cost photovoltaic solar panels. Synthetic iron sulfide is used with copper sulfide to create the experimental photovoltaic material.
Pyrite is used to make marcasite jewelry. Marcasite jewelry, made from small faceted pieces of pyrite, often set in silver, was popular in the Victorian era. Marcasite jewelry does not contain marcasite, which is a medieval term that encompassed both pyrite and the mineral now called marcasite.
|Dimensions||1 x 1 x 1 in|